System information

9530/8530 Manual Version 4.7 Page 55
Changes in Menu Structure Caused by Enabling the Dual Trigger Function
Counter Menu
The counter Menu now shows the option to track the counter counts on the Gate input when
functioning as a trigger.
Enable/Disable Counter
T Counts:
G Counts:
Zero the Counter
Channel Advanced Menu
The Channel Advanced menu now shows that the gate is used in the dual trigger mode and only
lets the user select to enable/disable the channel and choose which trigger source to use for that
channel.
Ch: -HGFE DCBA-
Mux: -0000 0001-
Enable/Disable Channel
Ch Gate: Dual Trig
Trig Src: Trig
Ch: -HGFE DCBA-
Mux: -0000 0001-
Enable/Disable Channel
Ch Gate: Dual Trig
Trig Src: Gate
Press the Page Button
Trigger Menu
The Trigger menu now has a third mode selection, Dual Trigger.
Mode: Disabled
Change Trigger Mode
Mode: Triggered
Level: 2.50 Volts
Edge: Rising/Falling Edge
Mode: Dual Trig
Level: 2.50 Volts
Edge: Rising/Falling Edge
Gate Menu
When the Dual Trigger option is evoked under the Trigger menu the Gate menu changes to allow
the user to only change the level and edge parameters.
Mode: Dual Trig.
Level: 2.50 Volts
Edge: Rising/Falling Edge