Generator Quick Start Guide

Model 802 Series Quick Start Guide • 11 •
Special Key Functions
This section describes special operating functions that can be selected once the
generator is operating. These functions operate by holding down one of the
indicated buttons while pressing and releasing the other button. If the primary
gating function of the held button is inadvertently toggled during the operation,
press the button a second time to restore the gating status.
Toggle Analog / Digital Video
Type
Image Outputs
STEP R G B ACS DCS DSS ON
Video Gate Sync Gate
Toggles between matching analog
and digital video outputs for the
current video format. Error 2741
indicates that a matching digital type
is not supported and Error 2748
indicates that a matching analog
video type is not supported
Rotate Video Color Type
Image Outputs
STEP R G B ACS DCS DSS ON
Video Gate Sync Gate
Cycles between RGB color and
Monochrome video for formats saved
with RGB color for the video type.
Cycles between Color Difference,
RGB color and Monochrome video for
formats saved with Color Difference
for the video type.
Set Pixel Depth
Image Outputs
STEP R G B ACS DCS DSS ON
Video Gate Sync Gate
Toggles between pixel depths of 8
bits-per-pixel (up to 256 colors or
shades of gray on the screen at one
time) and 4 bits-per-pixel (up to 16
colors or shades of gray)
Error 2074 indicates the generator
hardware configuration does not
support the selected pixel depth.
NOTES:
Enabling Status Display mode, as
described on the opposite page will
allow you to see a format's video type
settings and pixel depth.
Loading another format or reloading
the same format will reset the video
types and pixel depth to the format's
stored settings.