Generator Quick Start Guide

Model 802 Series Quick Start Guide • 5 •
Special Operating Modes and Functions
Mode _
Remove all modes
Set GPIB Address
Set baud rate to 9600
Enable programmable keypad
Initialize w/factory defaults
Calibrate
Enable Programming
Enable numeric keypad
Clone
Digital friendly mode
Analog friendly mode
Enable status display
Old format library
Hold at power-on _
ACS, DCS, DSS
DCS
R, DCS
R, OUTPUT
ACS, DSS
R, G, B
STEP
R
STEP, OUTPUT
G, B
R, B
STEP, G, B
G
Current status _
–
15
2400,N,8,1,N,N
OFF
–
–
OFF
OFF
–
OFF
OFF
OFF
OFF
Function _
Toggle analog/digital
Rotate video type
Set pixel depth
DDC-based autoconfig
Hold first, press second_
G, B
R, B
R, G
R, ACS
Current status _
Analog
RGB Color
8
FMT: fmt
Special Modes
Special Key Operations
Overview
GenOps Test Image
Front panel button combinations are used to select the generator's optional
operating modes and special functions. Some are only activated at power up
while others are activated once the generator is running. The built-in GenOps
test image shows the current status of all options. The upper portion of the image
lists the modes that can only be changed on power up and the lower portion lists
functions that are selected once the generator is in use. The left hand columns
list the names of the modes or special functions. The center columns list the
required button combinations and the right hand columns indicate the current
status of the mode or function. All of the special modes and functions are de-
scribed on the following pages.