Video Test Generator User Guide

802BT/802R Video Test Generator User Guide 119
4. Using the Format knob, select the signal format you want to use.
Any built-in formats may be used for this test. However, we recommend using several
formats spread over a wide range of frequencies. For example, the Test165 format is
commonly used to test at the maximum pixel frequency (165 MHz), while the DMT0660
format can be used to test at a very low frequency (25.175 MHz).Use the following
formats to test single-link DVI over a range of frequencies:
5. Start the analyzer (see “Starting the analyzer” on page 113).
Format Pixel rate (Mhz)
TEST165 165.000
DMT1660 162.000
DMT1285G 157.500
DMT1285A 148.500
DMT1648 135.000
DMT1275A 129.600
DMT1185 121.500
DMT1260G 108.000
DMT1085 94.500
DMT1170 94.200
DMT1075 78.750
DMT1070 75.000
720p60 74.250
DMT1060 65.000
DMT0885 56.250
DMT0872 50.000
DMT0875 49.500
DMT1043 44.900
DMT0860 40.000
DMT0685 36.000
DMT0785H 35.500
DMT0675 31.500
SMT0760V 28.322
DMT0660 25.175