Specifications

Chapter 4. Continuous availability and manageability 137
Draft Document for Review May 12, 2014 12:46 pm 5102ch04.fm
For more information about how to use the power of IBM Electronic Services, contact your
IBM Systems Services Representative, or visit the following website:
http://www.ibm.com/support/electronic
Service Event Manager
Allows the user to decide which of the Serviceable Events will be called home with the
Electronic Service Agent or not. It is possible to lock certain Events. Some customers might
not allow data to be transferred outside their company. Once the SEM is enabled the analysis
of the possible problems might take longer.
򐂰 The SEM can be enabled with the following syntax:
chhmc -c sem -s enable
򐂰 Disabling SEM mode and specify what state to leave call home in.
chhmc -c sem -s disable --callhome disable
chhmc -c sem -s disable --callhome enable
From the HMC GUI the basic configuration of the SEM can be performed. After selecting the
Service Event Manager as shown in Figure 4-3 the HMC console has to be added.
Figure 4-3 HMC selection for Service Event Manager