Specifications

Chapter 1. General description 5
Draft Document for Review May 12, 2014 12:46 pm 5102ch01.fm
򐂰 One DVD-RAM drive
򐂰 Integrated features:
– Service processor
– EnergyScale technology
– Hot-swap and redundant cooling
– USB 3.0 and 2.0 ports
– Two HMC ports
– One system port with RJ45 connector
򐂰 Redundant, 1400W hot-swap power supplies
1.4.2 Minimum features
The minimum Power S822 initial order must include a processor module, processor
activations, 32 GB of memory, memory activations, a storage backplane, one HDD or SDD, a
PCIe2 LP 4-port 1Gb Ethernet adapter (#5260), two power supplies and line cords, an
operating system indicator, a cover set indicator, and a Language Group Specify. AIX or Linux
is the primary operating system.
1.4.3 Power supply features
Two redundant 1400 Watt 200-240 Volt power supplies (#EB2M) are supported on the
Power S822 server.
The server will continue to function with one working power supply. A failed power supply can
be hot-swapped but must remain in the system until the replacement power supply is
available for exchange.
1.4.4 Processor module features
A maximum of two processors cards of either six processor cores (#EPX1) or ten processor
cores (#EPXD) are allowed. All processor cores must be activated unless they are factory
deconfigured by using feature code 2319.
The following listing defines the allowed quantities of processor activation entitlements:
򐂰 One 6-core, 3.89 GHz processor (#EPX1) requires that six processor activation codes be
ordered. A maximum of six processor activation code features (#EPY1) is required.
򐂰 Two 6-core, 3.89 GHz processors (#EPX1) require that twelve processor activation codes
be ordered. A maximum of twelve processor activation code features (#EPY1) is required.
򐂰 One 10-core, 3.42 GHz processor (#EPXD) requires that ten processor activation codes
be ordered. A maximum of ten processor activation code features (#EPY1) is required.
Note:
򐂰 One of the x8 PCIe slots on the Power S822 server is used for a PCIe2 LP 4-port
1 Gb Ethernet Adapter (#5260)
򐂰 One fewer PCIe slot is available with the dual IOA storage backplane feature EJ0U
Note: IBM i is not supported on the Power System S822.