Specifications
Chapter 1. General description 15
Draft Document for Review May 12, 2014 12:46 pm 5102ch01.fm
1.8.4 Feature code 0551 rack
The 1.8 Meter Rack (#0551) is a 36 EIA unit rack. The rack that is delivered as #0551 is the
same rack that is delivered when you order the 7014-T00 rack. The included features might
vary. Certain features that are delivered as part of the 7014-T00 must be ordered separately
with the #0551.
1.8.5 Feature code 0553 rack
The 2.0 Meter Rack (#0553) is a 42 EIA unit rack. The rack that is delivered as #0553 is the
same rack that is delivered when you order the 7014-T42 rack. The included features might
vary. Certain features that are delivered as part of the 7014-T42 must be ordered separately
with the #0553.
1.8.6 Feature code ER05 rack
This feature provides a 19-inch, 2.0 meter high rack with 42 EIA units of total space for
installing rack mounted CECs and/or expansion units. The 600mm wide rack fits within a data
center's 24" floor tiles and provides better thermal and cable management capabilities. The
following features are required on the #ER05:
#EC01 front door
#EC02 rear door or #EC05 Rear Door Heat Exchanger (RDHX) indicator
PDUs on the rack are optional. Each #7196 and #7189 PDU consumes one of six vertical
mounting bays. Each PDU beyond four will consume 1U of rack space.
If ordering Power Systems equipment in an MES order, use the equivalent rack feature ER05
instead of 7965-94Y so IBM Manufacturing can ship the hardware in the rack.
1.8.7 The AC power distribution unit and rack content
For rack models T00 and T42, 12-outlet PDUs are available. These include the AC power
distribution units #9188 and #7188 and the AC Intelligent PDU+ #5889 and #7109.
The Intelligent PDU+ (#5889 and #7109) is identical to #9188 and #7188 PDUs but are
equipped with one Ethernet port, one console serial port, and one RS232 serial port for
power monitoring.
The PDUs have 12 client-usable IEC 320-C13 outlets. There are six groups of two outlets fed
by six circuit breakers. Each outlet is rated up to 10 amps, but each group of two outlets is fed
from one 15 amp circuit breaker.