Specifications

5102ch01.fm Draft Document for Review May 12, 2014 12:46 pm
20 IBM Power System S822 Technical Overview and Introduction
Media used in LTO Ultrium 5 Half-High 1.5 TB tape drives are compatible with Half High LTO5
tape drives installed in the IBM TS2250 and TS2350 external tape drives, IBM LTO5 tape
libraries, and half-high LTO5 tape drives installed internally in IBM POWER6, POWER6+,
POWER7, POWER7+, and POWER8 servers.
Figure 1-6 shows the 7226 Multi-Media Enclosure.
Figure 1-6 7226 Multi-Media Enclosure
The 7226 enclosure offers customer-replaceable unit (CRU) maintenance service to help
make installation or replacement of new drives efficient. Other 7226 components are also
designed for CRU maintenance.
The IBM System Storage 7226 Multi-Media Enclosure is compatible with most IBM POWER6,
POWER6+, POWER7, POWER7+, and POWER8 systems, and also with the IBM
BladeCenter models (PS700, PS701, PS702, PS703, and PS704) that offer current level AIX,
IBM i, and Linux operating systems.
For a complete list of host software versions and release levels that support the 7226, see the
following System Storage Interoperation Center (SSIC) website:
http://www.ibm.com/systems/support/storage/config/ssic/index.jsp
Flat panel display options
The IBM 7316 Model TF4 is a rack-mountable flat panel console kit which can also be
configured with the tray pulled forward and the monitor folded up, providing full viewing and
keying capability for the HMC operator.
The Model TF4 is a follow on product to the Model TF3 and offers the following features:
򐂰 Slim, sleek, lightweight monitor design that occupies only 1U (1.75 inches) in a 19-inch
standard rack
򐂰 A 18.5-inch (409.8 mm x 230.4 mm), flat panel TFT monitor with truly accurate images
and virtually no distortion
򐂰 The ability to mount the IBM Travel Keyboard in the 7316-TF4 rack keyboard tray
򐂰 Support for the following IBM Keyboard/Video/Mouse (KVM) switch:
– IBM 1x8 Rack Console Switch (#4283)
Feature 4283, is a 1x8 Console Switch that fits in the 1U space behind the TF4. It is a
CAT5 based switch containing eight rack interface (ARI) ports for connecting either PS/2
or USB console switch cables. It supports chaining of servers using IBM Conversion
Options switch cable feature 4269. This feature provides four cables that connect a KVM
(Keyboard/Video/Mouse) switch to a system, or can be used in a daisy-chain scenario to
Note: Any of the existing 7216-1U2, 7216-1U3 and 7214-1U2 multimedia drawer are also
supported.