Owner's manual

881/882 Video Test Generator User Guide (Rev A.22) 319
To access the Image Control Tool:
1. Set up the generator for HDMI output. See “Setting up the generator for HDMI testing”
on page 302.
2. Press the Source key and select the desired format.
Alternatively, you can load the format with the following command:
FMTL format_name
FMTU
3. Open a Web browser (such as Internet Explorer) and type the generator’s IP address
in the address entry field. For example, enter the following: http://206.135.215.189/.
The generator home page appears in the browser.