Owner's manual

881/882 Video Test Generator User Guide (Rev A.22) 407
Setting up CEC compliance testing
To prepare for a compliance test involves the following:
• Downloading and Installing the Test Management Environment software on your PC
• Making physical connections
• Establishing and verifying IP connectivity with the generator
• Physically connecting the 882C(A) generator to the device under test
• Configuring the generator for HDMI
• Verifying continuity over the CEC bus
• Additional equipment required
Installing the TME software
This subsection provides procedures on downloading and installing the TME software on
your PC.
To install the TME software on your PC:
1. Download the TME software from the Quantum Data website at:
http://www.quantumdata.com/downloads/index.asp.
2. Unzip the TME software and store the directory on your PC.
Note: You must also have the Java Runtime Environment (JRE) 1.5 or later installed on
your PC. You can download the JRE from
http://www.java.com/en/download/windows_ie.jsp.
Making physical connections
This subsection describes how to connect your PC to the generator and also how to
connect the generator to the device under test.