Owner's manual

480 Chapter 14 DisplayPort Link Layer Testing
7. Click on the Source tab to access the window to run the tests. The source window is
shown below:
8. Select the tests you wish to run, the number of times you wish to run them and select
the lane configurations in accordance with the table below:
Video Format
Change without
Link Training check
box
Defines whether the source device under test supports a video
format change without performing link training.
Lane Count
Reduction check
box
Defines whether the source device under test supports a lane
count reduction without performing link training.
Power Save check
box
Defines whether the source device under test supports the Power
Save mode.
Function/Field Function
Select All activation
buttons
Enables you to quickly select all tests for a test suite.
Deselect All
activation buttons
Enables you to deselect all tests. Typically used prior to selecting a
few specific tests.
Function/Field Function