Owner's manual

881/882 Video Test Generator User Guide (Rev A.22) 493
2. In the ACA, from the File menu, select Connect to Analyzer. The Connect to
Analyzer dialog box appears.
3. In the Connect To box, enter the IP address of the generator you want to connect to,
and then click Connect.
4. From the CEC menu, point to Port, and the select the port you want to monitor.
5. On the toolbar, click the CEC button to enable it. Make sure all other buttons are
disabled.
6. From the File pull down menu specify New Trace.
7. Click the Capture button.