Owner's manual

548 Chapter 16 Testing EDID

2. Press the Source key and choose a valid HDMI or VGA format (for example, DMT0660)

by pressing the adjacent soft key.

Alternatively, to select the format through the command line interface, enter the

following command:

FMTL DMT0660

FMTU

3. Activate the HDMI-H, HDMI-D or VGA interface on the output port as follows:

a. Press the Interface key. A listing of signal interfaces appears on the generator’s

display as shown below.

b. Choose the HDMI-H, HDMI-D or VGA item by pressing the adjacent soft key. The

interface is activated and the port outputs the currently selected image and format.

c. Alternatively, to activate the interface through the command line interface, enter the

following commands:

XVSI 4 // Selects the HDMI-H interface

XVSI 3 // Selects the HDMI-D interface

XVSI 9 // Selects the VGA interface

ALLU // Applies the interface setting to the generator

VGA

HDMI-D

CVBS

S-VIDEO

SDI

HDMI-H