Owner's manual

604 Chapter 18 Testing HDCP

There are several configurations depending on what type of HDCP device you are testing.

Procedures for each are provided below.

Running HDCP compliance test on HDMI transmitters

To run the 1A and 1B series HDCP compliance tests on an HDMI source (transmitter):

Note: For the 882E, the 1A-08 test requires that you use the SRM disc for the 1A-08 test

if the source device has an optical drive. Refer to “To run the 1A-08 HDCP compliance test

using the SRM disc:” on page 611.

40 3C_II_04 (Repeater Upstream

w/Transmitter) (Between HDMI

Capable Transmitter and

Repeater)

Regular Procedure: HPD After Starting Third Part

of Authentication

41 3C_II_05 (Repeater Upstream

w/Transmitter) (Between HDMI

Capable Transmitter and

Repeater)