Quick Start Guide

24 882E Quick Start Guide - HDCP Compliance Testing with Encryption Status Tester (EST) - P/N 68-00210 Rev. B
CPTX:CPTU? // Queries the selected test to run (see table)
The following table describes the tests that can be performed.
To run the 3B series HDCP compliance tests on an HDMI repeater:
The 3B-01 test is run multiple times for the two read configurations: 1) short read and 2)
combined read. These multiple iterations are handled in the batch mode but you can
choose to run them through the command line as well.
CPTX:CPTR
I ndex Test Description
20 3A_01 (Repeater Downstream
w/Receiver) (Between HDMI
Capable Transmitter and HDMI
Capable Receiver)
Regular Procedure: With HDMI Capable
Receiver
21 3A_02 (Repeater Downstream
w/Receiver) (Between HDMI
Capable Transmitter and HDMI
Capable Receiver)
Irregular Procedure: (First Part of
Authentication) HDCP Port Access
22 3A_03 (Repeater Downstream
w/Receiver) (Between HDMI
Capable Transmitter and HDMI
Capable Receiver)
Irregular Procedure: (First Part of
Authentication) Verify Bksv
23 3A_04 (Repeater Downstream
w/Receiver) (Between HDMI
Capable Transmitter and HDMI
Capable Receiver)
Irregular Procedure: (First Part of
Authentication) Verify RO’
24 3A_05 (Repeater Downstream
w/Receiver) (Between HDMI
Capable Transmitter and DVI
Receiver)
Regular Procedure: With DVI Receiver