User Manual

9.1.3 Reflector N, D, B

Setting the reflector type is important so that the displayed distance,

guide number and f/# correspond to the reflector in use. The choices are

NORM (for the reflector supplied with Qflash), DIFF (for diffusers

supplied with Qflash, optional QF67A Dome diffuser, QF68 Soft Box, or

QF69 Mini Soft Box), BBE (optional Bare Bulb Enhancers QF62Bs and

QF62Bg) .

Notes:

When using QF62B s/g the manual parameters are accurate only for an

open area. In medium and small rooms the very widely dispersed light

will bounce off nearby walls and increase exposure. A practical solution

when using QF62B in small rooms is to meter the light, or use Auto, TTL,

or QTTL modes which will provide better exposures and attractive, soft

lighting.

When using a Telephoto Reflector QF63B the Auto mode cannot be

used because the flash sensor is blocked. Use Manual, TTL, QTTL or

Linked modes.

9.1.4 Speaker

You may want the speaker off for sensitive shooting, or turn it on for

audible confirmation of flash exposure.

9.1.5 AF Auto Focus

The Auto focus light responds to a signal from the camera. Turn this

option OFF if you want the light to ignore the camera and stay off.

9.2 Options menu 2 of 4

This menu changes :

Flash indicators

Button lock out

P1 –P8 lock out

Display light

Press the soft key located below

the option you want to change. Continue

to press that soft key to cycle through the settings for that option.

9.2.1 Flash indicators

The green Flash Indicators on either side of the Trio give visual

indication that a flash fired, whether the exposure was good, over, under,

or no flash, indicating that the flash did not fire. You can enable or

disable the lights.

OPTIONS MENU 2 OF 4

USE Å OR Æ FOR

MORE OPTIONS

P1-P8 DL

OFF

MODE

SET