User Manual

11. A Automatic Mode Operation

11.1 On camera Auto mode

F/number, ISO are user

adjustable. Pressing the Set

button will highlight them in

that order. Use the left (-) Å

and right (+) Æ arrow buttons

to adjust the highlighted setting

down or up.

Flash distance displays the working distance between your Qflash and

Subject based on the current settings. Moving outside this range may

result in an under or overexposed picture.

Using the Radio (on camera)

The internal radio can be used to trigger remote flashes, or room lights.

Set radio to SYNC.

Or the radio can be used to control the light output of remote Qflashes.

Set radio to LINK. The remote flash can be another Trio in RL mode or a

Qflash model 5d-R set to Linked to Local with an FW7Q, FW8R, or

FW10w.

Be sure that the channel and zones match the channel and zones set on

the Trio. See section 8.0 for setting the Channel and Zones on the Trio

11.2 Off Camera Auto mode

In the off camera operation the

Fill adjust will be disabled,

however the F/number, ISO

are user adjustable. Pressing

the Set button will highlight

them in that order. Use the

left (-) Å and right (+) Æ arrow

buttons to adjust the

highlighted setting down or up.

MODE

SET

AUTO

F 5.6

2.4 –22 FT ISO 200

FIRE OPT SAVE RADIO

MODE

SET

AUTO

F 5.6

2.4 –22 FT ISO 200

FIRE OPT SAVE RADIO