User Manual

13. QR QTTL Ratio Mode Operation

F/number, ISO are sent to the

flash from the camera.

Independent fill flash ratios can

be set on the Local (on-camera)

flash and Remote Groups 1

and 2

Pressing the Set button will

highlight them in that order. Use

the left (-) Å and right (+) Æ

arrow buttons to adjust the highlighted setting down or up.

When you Press the Set button, an ON/OFF soft key will appear on the

right of the display. You can use this soft key to prevent the Local, R1 or

R2 flashes from firing.

To prevent a Qflash from firing, press the Set button until the flash you

want to turn off is highlighted. Then press the OFF soft key, the word

“OFF” will appear next to that flash.

Using the Radio

Radio will default to QTTL mode. TTL ratio information will be sent to the

remote Qflash / Trio. You may still need to select the proper channel to

match the channel on the remote flashes. See section 8.0 for setting the

Channel on the Trio.

The remote Qflashes may be

1. A Trio set to RG mode, Remote Group R1 or Remote Group R2.

2. A Qflash model 5d-R with a FW7Q or FW8R or FW10w, set to either

Wireless Remote Group R1 or Wireless Remote Group R2.

13.1 QTTL Ratio mode soft keys

Only the default soft key functions are available

MODE

SET

QTTLWR FILL +0

F 5.6

R1 +1

ISO 200 R2 -1

FIRE OPT SAVE RADIO

(

DEFAULT

)