User Manual

17. RG Remote Group Mode Operation
When the RG mode is selected
the display will prompt you to
select one of three possible
groups.
Group L – Remote flashes set
to this group will have the
same exposure as the local
flash. Remote-linked to local
Qflash will appear on the display
if this group is selected
Group R1 / R2 – The operation of remotes set to this group depend on
the mode of the local flash.
Group R3 – This group is for use with the Pilot.
Changing the Remote Group
If after selecting the Remote Group you wish to change it, press the Set
button and the Group will highlight. Use the Left (-) Å and Right (+) Æ
buttons to scroll through the Remote Group choices or use the Remote
Group soft keys that appear.
Using the Radio
The radio will default to receive (Rx) mode. You may still need to select
the proper channel to match the Channel on the local Qflashes. See
section 8.0 for setting the Channel and Zones on the Trio. The function
of the remote Trio depends on the settings of the local Qflash.
If the local Qflash is :
1. A Trio set to advanced multi (AM), see section 18. Or if a 5d-R set to
Wireless Control, then mode, power, F/number and ISO for the remote
Trio is set on the display of the Local flash.
2. A Trio (or 5d-R) set to QTTLwR (QR), see section 13. Then the
remote Trio will automatically be set QTTL ratio. The ratio adjustments
for Groups R1 and R2 would be done on the display of the local flash.
3. A Trio (or 5d-R) is set to any other mode, then the remote Trio set to
Group R1 and R2 would default to Linked to local Qflash, and produce
the same exposure as the local flash.
17.1 Remote Group soft keys
Only the default soft key functions
are available
31
MODE
/
OK
SET
REMOTE GROUP R1
AUTO F 5.6
7
3.6 –32 FT
ISO 200
FIRE OPT SAVE RADIO
FIRE OPT SAVE RADIO
(
DEFAULT
)
+
-
RG