User Manual

4.5 Connecting Trio to a Camera

Loosen Shoe lock until metal “foot” protrudes fully.

Slide Trio into

camera hot shoe.

Tighten shoe

lock wheel

4.6 Powering the Trio

Before turning on any power to Trio always make all electrical

connections first, both to the camera and to the power pack.

The Trio is powered by any Quantum Turbo Battery including Turbo,

Turbo 2x2, Turbo Compact, Turbo SC, Turbo AC and Turbo Z.

Plug the Trio power cable into the flash, then into the output connection

of the power pack.

If a “Check Turbo” message appears on the Trio display, turn off the

Turbo, wait one second, and turn it on again. If the message appears

again, the power pack needs recharging.

Very Important Tips

For consistent exposures with your digital camera and Trio.

● Always do a custom white balance before shooting

● When shooting TTL use Aperture or Shutter priority or

Manual camera modes (P mode gives inconsistent exposures)

● Set your metering area to center weight, partial metering

instead of matrix or multi-spot metering.