User Manual

6. Soft keys

There are four soft keys located under the display. The function of these

soft keys will change based on user operation.

To change the function of the soft keys use the Left (-) Å and Right (+)

Æ buttons when no selection or setting is highlighted on the display. The

soft keys assignment will change to the next available one. Note that not

all soft key assignments are available for all modes

6.1 Default assignment

This is available for all Trio modes

FIRE – Test fire the Trio, and any remotes if the radio is turned on

OPT – Enter the options screen to change, speaker, indicator lights,

reflector, etc. See section 9.0

SAVE – Save this set up as one of the eight programs in PRGM MODE

(Program Mode). See section 19.0

RADIO – Enter radio set up menu to select radio mode (OFF, SYNC,

LINKED/QTTL, Rx), change zones and channels See section 8.0

6.2 Sensor Limit assignment

This is available for any Trio mode where

exposure is controlled by the sensor located on the front of the flash.

See section 11.5 for details on using the Sensor Limit

6.3 Radio Zones assignment

This is available when the radio is turned on

and for all modes except for QTTL Ratio (QR) and Advanced Multi (AM)

modes. In QTTL Ratio (QR) and Advanced Multi (AM) modes all zones

default to ON.

See section 8.1 on using zones.

6.3 Quick turn off assignment

Available for QTTL Ratio (QR) and

Advanced Multi (AM) modes only.

FIRE OPT SAVE RADIO

(

DEFAULT

)

1 ON 2 ON 3 OFF 4 OFF

(

RADIO ZONES

)

5 10 15

–

(

SENSOR LIMIT

)

LOCAL R1 R2 ON OFF

(

QUICK TURN OFF

)