User Manual

9. Options
Press the OPT (options) soft key to enter the options set up menus.
There are four options menus to select from. To exit the set up menu
press the MODE/OK or SET buttons
Use the LEFT (-) Å or RIGHT (+) Æ arrows to select the options menu
that contains the option you want to change.
9.1 Options menu 1 of 4
This menu changes :
Sensor limit or Sync
Reflector
Speaker
Auto Focus
Press the soft key located below
the option you want to change. Continue
to press that soft key to cycle through the settings for that option.
9.1.1 Sensor limit SL
You may change the sensor limit from this options menu or use the
softkeys when the flash is in Auto or Auto Fill mode.
See Section 11.5 for details on using the sensor limit.
9.1.2 Sync type
F, R, HSS
There are three settings for the sync.
F – Front curtain sync. Flash fires just after the first curtain opens.
R – Rear curtain sync . Flash fires just before second curtain closes.
HSS – high speed sync. HSS is available in Manual, QTTL, and
QTTLwR modes, for both the on-camera and remote TRIO.
Off-camera flash
When using a remote in HSS, there is no need to set any options. HSS
will automatically be selected when your shutter speed is set above 250.
On-camera flash
Canon users – Select HSS option if you want to enable High Speed Sync
on your camera.
Nikon users
– If you’ve selected high speed sync on the menu of your
camera, high speed sync will automatically be selected on the TRIO
when your shutter speed is set above 250.
16
OPTIONS MENU 1 OF 4
USE Å OR Æ FOR
MORE OPTIONS
SL N AF
SYNC OFF OFF
MODE
/
OK
SET
+
-