User's Manual

QF18 Rollei
QF19 FW59 Hasselblad
QF20 FW60 Bronica
QF22 Mamiya
QF23 Leica
QF24 FW64 Contax
QF25 FW65 Mamiya 645
* FW series TTL Adapters connect directly to the Transmitter FW9T
** QF series TTL Adapters require a Uni-Mod connected toFreeXwire TX, unless a Qflash is also connected to the Accessory
connector ofFreeXwire:
Adapters models may be updated periodically. Please check the latest Quantum Price List at your dealer, or www.qtm.com. Look
under Qflash andFreeXwire.
Appendix E -- Miscellaneous Connections
Model Description
FW33 Y Connector for Transmitter FW9T to connect a TTL adapter plus a local Qflash and FW31 cable.
MDC2 External power connection from QB1, 1+, or QB1
c to FreeXwire:
XDC2 External power connection from Bantam or QB1c to FreeXwire:
FW26 Multi-clip for use as belt, light stand or bracket attachment for FreeXwire
FW29 AC external adapter, US & Can, 115 VAC
Appendix F -- Specifications
Size: FreeWire FW8R/FW9T: 3.6 x 2.3 x 1.1 in. ( 9 x 6 x 2.8 cm)
Weight (w/ batteries): Receiver FW8R/FW9T: 4.3 oz (122g)
Batteries: 2x AAA cell alkaline, nicad, nickel-metal hydride, or lithium
Battery life: (Alkalines): FW8R: receiving four shots per minute: 24000 shots, 100 hours;
FW9T: sending four shots per minute: 36000 shots, 150 hours
Connected to Qflash with FW31 cable: Powered by Turbo Battery.
(batteries may be left in unit)
Battery life- after low battery signal (triple blink every 2 seconds): approx. 1-3 hours
Maximum Range: Varies with local conditions- up to 750’ (250m)
Maximum flash rate: 25 fps
Maximum sync delay from camera trigger to remote flash: 1/2000-sec normal sync; 1/3000 sec. (all RX Zones ON – fast sync
mode).
Minimum camera shutter speeds: Leaf shutters 1/500 , 1/250 focal plane shutters. In fast sync mode (All RX Zones ON) sync
speeds may be 1/1000 for leaf shutters, 1/500 for focal plane shutters.
Batteries: Receiver FW8R/FW9T supplied with 2 x AAA. External power is supplied whenever FreeWire is connected to Qflash
with FW31 cord. External power required 5-7 volts, center positive.
All equipment, specifications and descriptions are subject to changes, improvements and availability.