User Instructions

10. Q QTTL Mode Operation
F/number, ISO are sent to the flash from the
camera. Only the fill setting is user adjustable.
Press the Set button to highlight the fill setting.
Use the left  and right  arrow buttons to
adjust the fill up or down.
The fill setting is used to adjust the flash output
from 3 stops below (-3) the camera setting to 2
stops (+2) above the camera setting. The fill can
be adjusted in 1/3 steps.
Using the Radio
The internal radio can be used to trigger remote flashes, or room lights, set radio SYNC.
Or the radio can be used to control the light output of remote Qflashes, set radio QTTL. The
remote flash can be another Trio in RL mode or a Qflash model 5d-R set to Linked to Local
with an FW10w, FW7Q or FW8R.
Be sure that the channel and zones match the channel and zones set on the Trio
See section 8.0 for setting the channel and zones on the Trio
10.1 QTTL mode soft keys
If the radio is turned off, there is only the default soft
key functions available
If the radio is on, then the soft keys may be used to turn
the radio zones on / off
11. A Automatic Mode Operation
11.1 On camera Automatic mode
F/number, ISO are sent to the flash from the
camera. Only the fill setting is user adjustable.
Press the Set button to highlight the fill setting.
Use the left  and right  arrow buttons to adjust
the fill up or down.
The fill setting is used to adjust the flash output
from 3 stops below (-3) the camera setting to 2
stops (+2) above the camera setting. The fill can
be adjusted in 1/3 steps.
Flash distance displays the working distance between your Qflash and Subject based on the
current settings. Moving outside this range may result in an Under or Overexposed picture.
Page 15
MO D
E
/OK
SET
FIRE
OPT
SAVE
RADI
O
QTTL
F 5.6
7
FILL +0
ISO 200
FIRE
OPT
SAVE
RADI
O
(DEFAULT)
1 ON
2 ON
3 OFF
4 OFF
(RADIO ZONES)
MO D
E
/OK
SET
FIRE
OPT
SAVE
RADI
O
AUTO
F 5.6
7
ISO 200
3.6 – 32 FT
FILL +0