User Instructions

Using the Radio
The internal radio can be used to trigger remote flashes, or room lights, set radio to SYNC.
Or the radio can be used to control the light output of remote Qflashes, set radio to LINK. The
remote flash can be another Trio in RL mode or a Qflash model 5d-R set to Linked to Local
with an FW10w, FW7Q or FW8R.
Be sure that the channel and zones match the channel and zones set on the Trio.
See section 8.0 for setting the channel and zones on the Trio
11.2 Off Camera Automatic mode
In the off camear operation the Fill adjust will
be disabled, however the F/number, ISO are
user adjustable. Pressing the Set button will
highlight them in that order. Use the left and
right arrow buttons to adjust the highlighted
setting up or down.
Using the Radio
To enable the Trio to be fired remotely set the
internal radio to RX. An FW10w or FW9T must be
located at the camera position, or you can use another Trio at the camera position.
Be sure that the channel and zones match the channel and zones set on the Trio.
See section 8.0 for setting the channel and zones on the Trio
11.3 Auto mode soft keys
To change the function of the soft keys use the Left  and Right  buttons when no selection
or setting is highlighted on the display.
If the radio is turned off, the default and sensor limit soft key functions available
If the radio is on, then the soft keys may be used to turn
the radio zones on / off
11.4 Auto mode exposure indications
There are three types of exposure indications. The display will blink either OK, Over, or Undr.
The display will also indicate how much over or under the last exposure was, from +3 stops to -
3 stops. If an arrow appears then the exposure error is more than 3 stops (for example -3

).
If activated in Options (Section 8.2) the Speaker will sound after a flash. The audible signal is
one “beep” for “OK and ready”, and three “beeps” for “Undr” or “Over”.
Page 16
MO D
E
/OK
SET
FIRE
OPT
SAVE
RADI
O
AUTO
F 5.6
7
ISO 200
3.6 – 32 FT
5
10
15-20
OFF
(SENSOR LIMIT)
FIRE
OPT
SAVE
RADI
O
(DEFAULT)
1 ON
2 ON
3 OFF
4 OFF
(RADIO ZONES)