User Instructions

12.1 QTTL Ratio mode soft keys
Only the default soft key functions are available
In the QTTL Ratio mode the radio is set automatically and all zones are ON
13. M Manual Mode Operation
13.1 On camera Manual Mode
F/number, ISO are sent to the flash from the
camera. Only the power setting is user adjustable.
Press the Set button to highlight the power setting.
Use the Left  and Right  arrow buttons to
adjust the power up or down.
Power settings are adjustable in 1/3 steps from
full power to 1/64
th
power like this: 1/1, 1/1-, 1/2+,
1/2 ,1/2- …… 1/32.
Using the Radio
The internal radio can be used to trigger remote flashes, or room lights, set radio to SYNC.
Or the radio can be used to control the light output of remote Qflashes, set radio to LINK. The
remote flash can be another Trio in RL mode or a Qflash model 5d-R set to Linked to Local
with an FW10w, FW7Q or FW8R
Be sure that the channel and zones match the channel and zones set on the Trio.
See section 8.0 for setting the channel and zones on the Trio
13.2 Off camera Manual Mode
In the off camear operation Power, F/number, ISO are all user adjustable. Pressing the Set
button will highlight them in that order. Use the left  and right  arrow buttons to adjust
the highlighted setting up or down.
Using the Radio
To enable the Trio to be fired remotely set the internal radio to RX. A FW10w or FW9T must
be located at the camera position, or you can use another Trio at the camera position.
Be sure that the channel and zones match the channel and zones set on the Trio.
See section 8.0 for setting the channel and zones on the Trio
13.3 Manual mode soft keys
To change the function of the soft keys use the Left  and Right  buttons when no selection
or setting is highlighted on the display.
Page 19
FIRE
OPT
SAVE
RADI
O
(DEFAULT)
MO D
E
/OK
SET
FIRE
OPT
SAVE
RADI
O
MAN
F 5.6
7
ISO 200
32 FT
GN 55