User Instructions

14.1 Remote – linked to local Qflash soft keys
To change the function of the soft keys use the Left  and Right  buttons when no
selection or setting is highlighted on the display.
Both the default and radio zones soft key functions are available
15. RA Remote Auto Wireless Mode Operation
F/number, and ISO sent from the local flash.
The Local flash maybe a Trio, a Qflash model
5d-R and QTTL adapter with a FW10w or FW9T.
Or you may use a QTTL adapter with an FW9T
for remote auto with no local flash.
Using the Radio
The internal radio will be turned on automatically,
but you may still need to select the proper channel
to match the channel on the Remote flashes. See section 8.0 for setting the channel and zones
on the Trio.
The local flash may be a Trio in any mode, the radio of the local Trio must be set to LINK or
QTTL.
The local flash may also be a Qflash5d-R in any mode with an FW10w or FW9T. The TTL
feature / switch must be turned on, see your FW instructions for turning the TTL feature on.
Or the local flash may be a QTTL adapter with an FW9T.
15.1 Remote Auto Wireless soft keys
To change the function of the soft keys use the Left  and Right  buttons when no selection
or setting is highlighted on the display.
The default, radio zones and sensor limit soft key functions are available .
15.2 Remote Auto Wireless exposure indicators and sensor limit
The exposure indicators and sensor limit function the same as they do in Auto mode.
See section xx.x
Page 21
MO D
E
/OK
SET
FIRE
OPT
SAVE
RADI
O
REMOTE AUTO W
F 5.6
7
ISO 200
3.6 – 32 FT
FIRE
OPT
SAVE
RADI
O
(DEFAULT)
1 ON
2 ON
3 OFF
4 OFF
(RADIO ZONES)
FIRE
OPT
SAVE
RADI
O
(DEFAULT)
1 ON
2 ON
3 OFF
4 OFF
(RADIO ZONES)
5
10
15-20
OFF
(SENSOR LIMIT)