User Instructions

17. AM Advanced Multi Mode Operation
This mode gives full control of the Mode and
all the settings of the Local flash plus two
remote flash groups.
Press the Set button until you reach the setting
that you want to change is highlighted. Then
use the Left  and Right  buttons to adjust
the highlighted setting up or down
When the Set button is pressed, the soft keys
allow you to “jump” to a setting without having
to scroll through all the settings.
Using the Radio
In Advanced Multi mode the radio is set automatically and all zones are ON. You may still need
to select the proper channel to match the channel on the Remote flashes. See section 8.0 for
setting the channel and zones on the Trio.
The Remote flashes can be another Trio or a Qflash model 5d-R with an FW10w, FW8R, or
FW7Q.
The Remote flash must be set to one of the three following groups, Group L, Group R1, or
Group R2.
17.1 Advanced Multi mode soft keys
To change the function of the soft keys use the Left  and Right  buttons when no selection
or setting is highlighted on the display.
The default soft key functions are available
The soft keys can also be used to quickly turn
off the Local flash or any of the remote groups
To turn off any group first press the soft key for that Group, then press the ON / OFF soft key.
When the group has been turned off, the word OFF will appear next to that group.
If the local flash is set to Auto then the
sensor limit functions are available
Page 23
MO D
E
/OK
SET
FIRE
OPT
SAVE
RADI
O
ADV. MULTI
ISO 200
LOCAL MAN 1/8
R1 AUTO F 5.6
7
R2 AUTO F 8.0
3
FIRE
OPT
SAVE
RADI
O
(DEFAULT)
LOCA
L
R1
R2
ON
OFF
(QUICK TURN OFF)
5
10
15-20
OFF
(SENSOR LIMIT)