User Instructions

Replace the flash tube only with Quantum type QF30 or QF30uv for Qflash model T5d / T5d-R.
Qflash model X5d / X5d-R requires QF32 or QF32uv flash tubes. Other flash tubes will not
provide proper exposure, may not work at all, or they may damage the Qflash.
4.2 Reflectors and Bare Bulb
Reflectors are secured by the locking ring
near the base of the reflector. Rotate the
ring in the directions shown in the diagram
to loosen or tighten the reflectors.
When inserting a reflector, first slowly
rotate it until the notch in the reflector
“drops” fully into head of the Qflash.
Then tighten the locking ring. If you do
not let the reflector drop fully into the
Qflash before locking it, the reflector may
become loose during use.
4.3 Bounce and Swivel Head
The head position is locked and can be
changed with a single button (see diagram).
Press and hold this button, then adjust the
head to the desired position. Release the
button, and slightly move the head until it
“clicks” and locks the head into the vertical
and horizontal planes.
4.4 Connecting Trio to a Camera
Loosen Shoe lock until metal “foot” protrudes fully.
Slide Trio into camera hot shoe.
Tighten shoe lock wheel.
Page 24
Page 5
The “normal” QF60 reflector is supplied with Qflash 5d-R. Other reflectors are available
as options from your dealer.
Guide No. for ISO 200
QFX5d-R
Reflector
Approx.
Angle
QFT5d-R
200 Ws
400 Ws
Normal QF60
55
226ft / 72m
226ft / 72m
320ft / 100m
QF60 w/flat diffuser
70
128ft / 40m
128ft / 40m
180ft / 56m
QF67A Dome diffuser
QF 68 Soft Box
QF69 Mini Soft Box
90
128ft / 40m
128ft / 40m
180ft / 56m
QF62Bs/g Bare Bulb
Reflector
120
90ft / 28m
90ft / 28m
128ft / 40m
QF63B Tele Reflector
20
453ft / 143m
453ft / 143m
640ft / 202m
RELEASE
BUTTON
UNLOCK
LOCK