Instructions / Assembly

INSTALLATION INSTRUCTIONS
PART LIST
Wire shelf 4 pcs
Lower post
4 pcs Upper post
4 pcs
Floor leveler
4 pcs
Split Sleeves
16 pairs
Cone
Upper post
Lower post
After shelf is in place, lay a piece of cloth on the
corner of the shelf and hit it with a rubber mallet to
make it clamp tightly with sleeves.
Repeat step 1, 2, 3 for the second shelf.
Mark in the post groove for the desired height,
then install the split sleeve onto the groove
Screw the floor leveler into
the lower post.
Slide the shelf with the bottom end down along
the post until it slides over the sleeves.
INSTRUCTIONS
If any questions on assembly, please call Quantum Storage Systems at 1-800-685-4665
[phone]
www.quantumstorage.com
Repeat step 1, 2, 3 for the remaining shelves
and complete
Connect the upper post with the lower post
1 2
3 4
5 6
4-TIER HEAVY-DUTY WIRE SHELVING ASSEMBLY INSTRUCTIONS