User Guide

Quantum 1107 www.quantumrehab.com 23
Power Base Disassembly
The Quantum 1107 power base disassembles into six parts for easy transportation and storage. See figure 13.
To disassemble the power chair:
1. Turn off the power to the controller.
2. Disconnect the controller. See figure 6.
3. Remove the seat.
4. Press the foot platform release button and lift off the foot platform. See figure 13.
5. Flip down the battery box latches on each side of the power base. See figure 14.
6. Slide the battery boxes back and off of the power base.
7. Flip up the center section latch. See figure 14.
8. Rotate the center section forward.
9. Grab a side section by the side frame handle.
10. Lift the side section up and off of the center section.
11. Grab the other side section by the side frame handle.
12. Lift the second side section up and off of the center section.
NOTE: Perform the disassembly steps in reverse order to assemble the power chair.
NOTE: During assembly, make sure the battery box latches are in the up (locked) position and the center
section latch is in the down (locked) position.
IV. ASSEMBLY/DISASSEMBLY
Figure 13. Quantum 1107 Power Base Parts
FOOT PLATFORM
RELEASE BUTTON
RIGHT FRAME SECTION
LEFT FRAME SECTION
REAR BATTERY BOX
FRONT BATTERY BOX
FOOT PLATFORM
CENTER SECTION