User Guide

Quantum 1107 www.quantumrehab.com 29
V. COMFORT ADJUSTMENTS
Swing-away Footrests
Swing-away Footrests (SFRs) enable you to rotate the
footrests to the side before you transfer onto or off of
your power chair.
To rotate the SFRs:
1. Push in the release lever. See figure 24.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two adjustment screws from the side of each
footrest extension. See figure 24.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.
Elevating Leg Rests (Optional)
Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 12–19 in.
To rotate the ELRs:
1. Push in release lever A. See figure 25.
2. Rotate the ELRs.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of each leg
rest extension. See figure 25.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
To adjust the ELR angle:
1. Push down release lever B. See figure 25.
2. Move the leg rest to the desired angle.
LEG REST
ADJUSTMENT
SCREWS
Figure 25. Elevating Leg Rests
LEG REST
EXTENSION
RELEASE LEVER B
RELEASE LEVER A
A
C
D
B
B
C
D
A
Figure 26. Multi-Axis Foot Plate (ELR Shown)
SETSCREW
Multi-Axis Foot Plate
The multi-axis foot plate assembly can be installed on either a
swing-away footrest or an elevating leg rest. The multi-axis foot
plate has four adjustments: leg rest length (A), position (B), tilt
(C), and angle (D). See figure 26.
To change leg rest length (A):
1. Remove the hardware.
2. Move the leg rest to the desired position.
3. Reinstall the hardware.