User's Guide

Quantum Bezel Replacement Guide
Document 81-81252-05 A01
October 2006
12
Install the New Bezel 0 1 Insert the left bezel tab into the left tab slot (see figure 2).
Figure 2 VS160/DLT-V4 Install
2 Gently press in the right bezel tab and insert it into the right tab slot.
3 Make sure the tab on top of the tape drive fits into the slot on the top of
the bezel (see figure 2
).
4 Make sure the bezel dust door opens and closes freely, and verify the
door spring is in place.
Caution: Do not drag the bezel across the drive front panel.
Door
spring
Left bezel tab
Seated tabs
Right tab
slot
Top tab