Installation guide

16
Section 2: INSTALLATION DETAILS
DOMESTIC INSTALLATION GUIDE
FIGURE 1A: INSTALLATION DIAGRAM (COMPACT SYSTEMS)
AS2712 LIC.2650
SAI GLOBAL
AS3498 WMKA2531
SAI GLOBAL
Fan Must be at least 500mm
away from the wall, or facing
away from the wall
Recommended Tank
installed on a concrete
plinth or poly slab
Back Cover Must be at least
100mm away from the wall
Front Cover Must not
be facing the wall
Recommended That 400mm
distance is allowed above the
top of the water heater.
Power Cable (Not
shown in photograph)
Pressure and
Temperature
Relief (PTR) Valve
Should be connected to
nearest drainage point
Note: the Hot Water
Outlet is located close
to the PTR Valve.
Water Temperature
Sensor located on
the front of the tank