Installation guide
17
DOMESTIC INSTALLATION GUIDE
FIGURE 1B: BASIC TANK LAYOUT WITH RECOMMENDED VALVES (EXCEPT TEMPERING)
FIGURE 1C: DOMESTIC INSTALLATION DIAGRAM
Tank Orientation Diagram for Compact Units (except Compact Titan)
Note: If installing multiple Compact units, the orientation of the tank will need to be at 90 degrees
to the normal arrangement so that the fan points out from the wall rather than along it. This is so
cold air being discharged from one unit is not drawn in by the one next to it.
The space between multiple units should be a minimum 200mm.
Condensation
Drain
Power Cord
100mm Min
Wall
500mm
Min
Water
Connections
15°
32°
200-500mm
PTR Valve
Front Access