Operator's Guide

Chapter 1 Introduction
Operator Accessible Components
12 Quantum|ATL 7100 Series Library Operator’s Guide
Drive Access
Door
1
The drive access door (see figure 8
) is intended for use by field
service engineers and is not normally used by operators. For safety
purposes, an interlock switch removes power from the robotics
equipment when the door is opened.
Always press the STANDBY button to open any library door. The
FAULT indicator flashes until the current command is completed.
Wait until the
STANDBY indicator is on solid and System Off-line is
displayed before opening the door.
Figure 8 Drive Access
Door
Drive access door