Operator's Guide
Chapter 2 Operating the Library
Using the Control Panel Menus
26 Quantum|ATL 7100 Series Library Operator’s Guide
Figure 15 Menu
Navigation Example
Exiting from Menu Mode: Conventional Method 2
Use the ↑ and ↓ buttons to navigate to an Exit option, then press
the
SELECT button. This takes you one level up in the menu
hierarchy.
1 Continue until the following is displayed in the SDA.
2 Press SELECT to exit menu mode.
Menu:
Exit
“<” (less than sign)
indicates feature is
active
SELECT — Select the “Configuration” menu
Ø — Bypass the “Inquiry” submenu
Ø — Bypass the “SCSI Address” submenu
Ø — Bypass the “Power-Up State” submenu
Ø — Bypass the “Num of Drives” submenu
SELECT — Choose the “Auto Clean” submenu
SELECT — Select the “Enabled” Option
— The SDA displays the status
“SUCCESS” when the function is
finished.
— Press the
↑ or↓ button and the
SELECT button simultaneously to exit
the menu mode or use them separately
to navigate to the Exit or another
function.
Status Display
Switch
Description
Menu:
Configuration
Menu: Configurati
Auto Clean..
Menu: Auto Clean
Enabled
Menu: Auto Clean
Enabled<
Menu: Configurati
Inquiry
SCSI Address..
Power-Up State
Num of Drives..
Menu: Enabled
..Working..
SUCCESS
Submenu function
“Auto Clean”
Main menu function
“Configuration”