Operator's Guide

Chapter 2 Operating the Library
Using the Control Panel Menus
28 Quantum|ATL 7100 Series Library Operator’s Guide
Performing a Library Self-Test 2
This option performs a complete self-test of the library.
1 Press and release the control panel STANDBY button, and
verify the SDA shows Off-line.
2 To enter menu mode, press and release the SELECT button.
Verify the following is displayed in the SDA:
3 Press the ↓ button until Diagnostics is displayed in the SDA:
4 Press the SELECT button to select the Diagnostics menu. Verify
the following is displayed in the SDA:
5 Press the ↓ button until Selftest All is displayed in the SDA:
6 Press the SELECT button. The following is displayed in the
SDA:
7 The self-test should take several seconds to complete. If the
self-test completes successfully, the following is displayed in
the SDA:
Menu:
Configuration..
Menu:
Diagnostics..
Menu:Diagnostics
Home All
Menu:Diagnostics
Selftest All
Menu:Selftest Al
..WORKING..
Menu:Selftest Al
SUCCESS