Operator's Guide

Chapter 2 Operating the Library

Using the Control Panel Menus

Quantum|ATL 7100 Series Library Operator’s Guide 29

Setting the Library

SCSI Address

The SCSI address of the library can be set using the SCSI Address/

Robotics submenus.

1 Enter the menu mode.

2 Press the SELECT button to choose the Configuration menu

and verify the following is displayed in the SDA:

3 Press the ↓ button once time to bypass the Inquiry menu and

verify the following is displayed in the SDA:

4 Press the SELECT button to choose the SCSI Address submenu

and verify the following is displayed in the SDA:

5 Press the SELECT button to choose the Robotics submenu and

verify the following is displayed in the SDA:

6 Use the ↑ and ↓ buttons to navigate to the SCSI ID number for

the library.

7 With the proper SCSI ID number displayed on line 2, press the

SELECT button.

Note: The default SCSI address for the library is 0 (zero).

Note: SCSI address 7 is typically reserved for the host

controller.

Menu:Configuration

Inquiry

Menu:Configuration

SCSI Address

Menu:SCSI Address

Robotics

Menu:Robotics

SCSI ID 0