Operator's Guide

Chapter 2 Operating the Library
Using the Control Panel Menus
40 Quantum|ATL 7100 Series Library Operator’s Guide
Cleaning a Drive 2
You can use the drive clean option to clean a drive when
autocleaning is disabled or additional cleaning is required for a
drive (see Enabling/Disabling the Auto Clean Option
on page 34
for a description of the auto clean option.
1 Enter the menu mode.
2 Use the ↓ button to bypass the Configuration menu and verify
the following is displayed in the SDA:
3 Press the SELECT button to choose the Drive Control menu.
4 Verify the following is displayed in the SDA:
5 Use the ↓ button to bypass the Unload submenu. Verify the
following is displayed in the SDA:
6 Press the SELECT button to choose the Clean sub-menu and
verify the following is displayed in the SDA:
7 Use the ↑ and ↓ buttons to select the proper drive number (see
table 3
).
8 With the proper drive number displayed on line 2, press the
SELECT button and verify the following is displayed:
Where n = the number of the drive that you selected.
Menu:
Drive Control
Menu:Drive Contr
Unload
Menu:Drive Contr
Clean
Menu:Clean
Drive 1
Menu:Drive n
..Working..