User's Manual

Quantum|ATL 7100 Series Library Unpacking Instructions
Document 6241100-03, Ver. 3, Rel. 1
August 2001
Unpacking the Library 11
Figure 8 Ramp Extensions
Checking the Packing
List
0
After you finish unpacking the library, check the packing list to verify
that you have received all library components and accessories. If any
part is missing or damaged, contact your authorized reseller.
Positioning the
Library
0
To position the library:
1 Map out a route to the installation site.
2 Verify the floor clearance, strength, and inclination information
(see figure 2
).
3 Verify that the library’s leveling feet are raised. If not, raise each
foot as needed as by turning the leveling foot until it is fully
retracted (see figure 9
).
Warning: The library weighs approximately 500 pounds (227 kg).
Use at least two people to unpack, move, and install the
library.
Ramp extensions
Heat seal seam