User's Manual

Quantum|ATL 7100 Series Library Unpacking Instructions
Document 6241100-03, Ver. 3, Rel. 1
August 2001
Installation Procedures 13
Installation Procedures 0
This section explains how to unpack the library’s internal packing
materials and prepare it for installation. The following are the major
steps in this procedure:
• Removing the internal packing materials
• Storing the shipping materials
• Leveling the library
Removing the Internal
Packing Materials
0
To remove the internal packing material from the library:
1 Remove the packing material from the load port door (see
figure 11
):
a Open the load port door.
b Remove the foam sheet.
c Close the load port door.
2 Remove the packing material from the drive access door (see
figure 11
):
a If necessary, unlock the drive access door.
b Open the drive access door.
c Remove the foam sheet.
d Close the drive access door.
3 Remove the packing material from the front door by using the
procedure in step 2.
4 Remove the packing material from the storage array door:
a If necessary, unlock the storage array door.
b Open the storage array door.
c Remove the foam sheet.