User's Manual

Quantum|ATL 7100 Series Library Unpacking Instructions
Document 6241100-03, Ver. 3, Rel. 1
August 2001
Unpacking the Library 7
Unpacking the Library 0
This section explains how to unpack the library and move it to its
installation location. The following are the major steps in this section:
• Receiving the library
• Unboxing the library
• Checking the packing list
• Positioning the library
Receiving the Library0
Inspect the shipping pallet and carton for damage that may have
occurred during shipment. Report any damage to the shipper.
Unpack the Library 0
To unpack the library:
1 Verify the minimum floor space requirements (see figure 4).
Note: Before following the instructions in this section, verify
the installation site meets the requirements found in
“Selecting an Installation Location” on page 4 of this
document.
Warning: The library weighs approximately 500 pounds (227 kg).
Use at least two people to unpack, move, and install the
library.
Note: Unpacking the crate requires a minimum of 8 feet (2.44
meters) in front of the library, and adequate space at the
sides and back for two people to maneuver.