User's Manual

Quantum|ATL 7100 Series Library Unpacking Instructions
Document 6241100-03, Ver. 3, Rel. 1
August 2001
Unpacking the Library 9
3 If the optional cable cover is included:
• Remove the cable cover box from the top of the library.
• Set the cable cover box aside.
• Refer to the Quantum|ATL 7100 Series Cable Cover
Installation Instructions to install the cable cover.
4 Cut the two steel bands that secure the cardboard box to the pallet.
5 Lift the box top straight up and off the cardboard box (see
figure 6
).
6 Open the four retaining clips on the rear of the cardboard box.
7 Unwrap and remove the cardboard box from the library.
Figure 6 Removing the
Cardboard Box
8 Lift the accessories tray up and off the library (see figure 7).
9 Lift the foam cap up and off the library (see figure 7).
10 Remove the two screws that secure the stop block. The stop block
is located under the library in front of the casters.
Box top
Retaining clip
Cardboard box
Pallet