Installation Guide

Appendix B Supplemental Installation Procedures
ACL 4/52 Facilities Planning and Installation Guide 31
Appendix B
Supplemental Installation
Procedures
B
The procedures contained in this appendix are provided for the Field
Service Engineer’s convenience during the installation of the library. If
there are additional tasks that you are asked to perform by the
customer’s System Administrator, refer to
Document No 6211222, ACL
4/52 Operator’s Guide
.
The following procedures are contained in this appendix:
•
Defining the library power-up state
•
Enabling/disabling the auto-clean option
•
Enabling/disabling the auto-load feature
•
Loading the library with cartridges (through the load port)
•
Performing an inventory
•
Turning the interior light on/off
Note:
The following procedures require familiarity of the library menu
mode.