Installation Guide

Appendix B Supplemental Installation Procedures
Enabling/Disabling the Auto-Load Feature
ACL 4/52 Facilities Planning and Installation Guide 37
8
Use the
↓
button to bypass the
Disabled
option and verify that the
following is displayed in the SDA:
9
With the desired option displayed on Line #2, press and release the
SELECT
button.
10
Press and release the
↑
or
↓
button to clear the resulting display
from the command.
11
Press and release the
↑
or
↓
button and the
SELECT
button
simultaneously, and verify that
System On-line
or
System Off-Line
is displayed in the SDA.
Menu: Auto Load
Enabled