Operator's Guide

Chapter 1 Library Overview
Operator Accessible Components
4 ACL 4/52 Operator’s Guide
Operator Accessible Components
1
The operator of the ACL 4/52 library will need access to the following:
• Control panel
• Load port
• Front door
• Rear panel
• DLT tape drive status/control panel
Additionally, the control panel allows you to perform several types of
functions (operational and diagnostic) using the menu mode. The
menu mode functions and the items listed above are discussed in the
following paragraphs.
Control Panel
1
The control panel (figure 3) is located on the right front of the library.
Its features are described in table 2 on page 11.
Figure 3 Control Panel
STOP
OPEN CLOSE
STANDBY
FAULT
SELECT
TA00003/15
Control Panel
Status Display Area
(16 Characters/2 Lines)
Scrolling Buttons
(Up
{
↑
}
and Down
{
↓
})