Operator's Guide

Chapter 1 Library Overview
Operator Accessible Components
ACL 4/52 Operator’s Guide 9
Figure 6 Rear Panel
DLT Tape Drive
Status/Control Panel
1
A status/control panel is located on each DLT tape drive (figure 7,
figure 8, and figure 9). The features of the status/control panel are
described in table 3 on page 12.
For detailed discussions of the DLT tape drive, refer to the appropriate
product manual.
SCSI PORT 1
SCSI PORT 4
AC Power Receptacle
Spares
SCSI PORT 3
DIAG
TA00032
SCSI PORT 2
(Breakouts)
and Switch
* Connectors shown for default
SCSI configuration.