Operator's Guide

Chapter 1 Library Overview
Menu Mode Structure
ACL 4/52 Operator’s Guide 13
Menu Mode Structure
1
Some of the operator’s responsibilities include using the control panel
menu mode. The menu mode is entered by placing the library in the
standby mode and then pressing the
SELECT
button on the control
panel. Once the menu mode is entered, the
UP-ARROW
(
↑
)
and
DOWN-ARROW (
↓
)
buttons are used for navigating through the
menu and the
SELECT
button allows the operator to choose menus
and/or execute options. When in the menu mode, the Status Display
Area (SDA) displays two lines of the menu:
• The upper line (line #1) of the display is passive. It simply shows
the name of the current menu or sub-menu.
• The lower line (line #2) is the active line. When the operator
presses the
SELECT
button, the sub-menu or function displayed
on the lower line is the option selected or executed.
The overall structure and capabilities of the menu mode are shown in
figure 10 on page 13. The functions for which the operator will be
responsible, and a discussion of navigating through the menus is
provided in the paragraphs that follow.
Figure 10 Menu Structure
Line #1
Line #2
Cal All
Cal Storage
Cal Drives
Cal Load Port
Home All
Selftest All
Status Actuator
Move Actuator
Inventory
Exercise All
Exit Menu
Configuration
Drive Control
Calibration
System Test Robot Control Diagnostics
MAIN MENU
Exit Menu
Report Results
Random Shuffle
Pick Each Bin
Exit Menu
Inquiry
SCSI Address
Power-Up State
Num of Drives
Auto Clean
Retries
Auto Load
Language
Set View
Auto Inventory
No Barcode Scan
Emulate Exabyte
Temperature Det
Exit Menu
Unload
Clean
Exit Menu
Random /No Scan
Pick All
Empty Load Port
Pick Bin
Pick Drive
Place Bin
Place Drive
Barcode Bin
Barcode Drive
Exit Menu