Operator's Guide

Chapter 2 Operating Procedures
Operating Procedures
24 ACL 4/52 Operator’s Guide
Figure 12 Inserting/Removing
Tapes
Removing Tape
Cartridges
2
To remove a tape cartridge:
Note:
Use the view port to determine whether or not the load port contains
tape cartridges to be removed.
1 When tape cartridges are ready to be removed, press the load port
OPEN
button and verify the indicator begins blinking. (It may
require several seconds for the load port door to automatically
open.)
Warning:
Mechanical hazards could be exposed when the load port is
partially open or closed. Do not attempt to insert hands or
fingers into the load port opening at any time.
2 Remove the tape cartridge(s) from the load port bin(s).
3 Press the load port
CLOSE
button.
Tape Cartridge
TA30010d
Bar code Label
Load Port
Opens to Right/
Closes to Left